AJAX MotionCAM Outdoor
Early motion detection is what you get when you use this AJAX MotionCAM Outdoor Motion Detector with Photo Camera especially for outdoor use.
With this detector you will be able to detect unwanted visitors before they have forced a window or door and are already inside your home. In other words, with the MotionCAM Outdoor you prevent actual burglaries because the siren sounds before the burglar can approach your house.
The big difference with the normal AJAX MotionProtect Outdoor is that this outdoor motion detector not only reports unwanted visitors, but also sends multiple pictures of the offender directly to your smartphone. So you know immediately what action to take in case of an alarm.
The quality of the photos is adjustable in 3 modes. The maximum resolution is 640×352 pixels. In addition, resolutions of 160×120 and 320×240 are possible. The higher the pixel resolution, the longer it may take before the first photo is displayed on your phone after a notification. If the detector has sufficient reception, the times for receiving the photo are up to 7 seconds for the smallest version, and 9 to 20 seconds for the largest version. An alarm notification is always transmitted within 0.15 seconds. The standard photo resolution of 320×240 which lasts up to 9 seconds is sufficient to be able to determine what is happening in your garden. Of course, the camera is equipped with infrared night vision in order to provide a good overview of the situation even in complete darkness.
Protects against sabotage such as taping
The AJAX MotionCAM Outdoor is a wireless outdoor motion detector with protection against masking and false activation. It is connected to the AJAX security system through the Jeweller security protocol and has a range of up to 1,700 meters when there are no obstacles. The detector can operate for up to 5 years on pre-installed batteries or from an external power source. Photo transmission is via the Wings wireless signal, and this is available on the Hub 2 and Hub 2 Plus. If you are using this detector, or intend to do so in the future, always choose one of these Hubs.
Combining indoor and outdoor detectors
If you use motion detectors both inside and outside the house, you obviously don’t want all the detectors to be on when you are in the house. Therefore, it is wise to create groups that you can operate separately from each other.
In this way, for example, you can activate only the detectors in the garden during the night and walk around freely in the house without fear of activating an indoor detector.
Creating groups and rooms
In the AJAX application, it is possible to create both rooms and groups.
Multiple detectors can be linked to one room, but this does not mean that if you choose to create groups, all detectors in one room must also be active in one group. Groups and rooms are independent of each other, a group can also consist of several detectors from different rooms.
If you use outdoor motion detectors like AJAX MotionProtect Outdoor, for personal convenience, always create a group that only activates these outdoor detectors. This way you will always be able to choose to receive a notification only if someone walks into your garden, and you will always be able to walk around freely in your house.
LISA intelligent algorithm for false alarm prevention
AJAX MotionCAM Outdoor accurately detects people, and is virtually immune to other moving objects or animals.
LISA makes MotionCAM Outdoor a formidable barrier to intruders. The digital algorithm accurately identifies the movement of a person while ignoring animals, the swaying of trees and plants, and birds and insects that land on the detector.
Ignores all unimportant events
LISA analyses the similarity of signals from two sensors in two phases. If the signals appear similar in the first phase, but the detected similarity is insufficient to trigger an alarm, the comparison of the spectral components is initiated. It helps to ignore trees that are in the detector’s field of view.
The detector ignores bushes up to 80 cm high and trees whose branches only cross the upper detection lines.
Prevents intruders that cannot be seen with the naked eye
The MotionCAM Outdoor is equipped with the maximum possible protection for outdoor detectors. The anti-masking function, which is on round the clock as standard, detects the installation of barriers, overpainting, the application of paint or a transparent coating to one or two lenses. The integrated tamper detector triggers an alarm when the dust- and humidityresistant detector housing is opened.
- Detects painting and sticking of the detector
- Protection against unauthorised opening
Installation example detached house
This way, you will not have any unprotected areas in your garden. The image below shows how you can create good security with 4 MotionCAM Outdoor.