AJAX MotionProtect
AJAX MotionProtect is a wireless motion detector intended for installation inside your home or business.
Detection range of MotionProtect
The AJAX MotionProtect can check an area of 12 meters from the sensor for movement at an angle of 90 degrees. If you place the detector in the corner of a room, the entire room will be protected.
Range from the Hub
The range of the AJAX MotionProtect is 1,700 meters in open field. The ideal mounting height is 2.40 meters, and the standard supplied battery lasts up to 4 years. Of course, all installation supplies are included.
Mounting height
The ideal height to mount the MotionProtect is 2.40 meters. At this height the detector is the least sensitive to the possible presence of pets. After all, it is not intended to receive a burglary alarm if your dog or cat walks through the living room.
At this height, a dog of up to 20 kilograms can walk around freely without triggering the alarm. If you mount the AJAX MotionProtect lower than the recommended 2.4 metres high, it will respond more quickly to pets and will also reduce the detection distance of 12 metres.
Registration and Mounting
AJAX MotionProtect connects to the AJAX security system in a few taps. Open the AJAX app, scan the QR code and assign the detector to one of the rooms.
Mount the detector on a wall without disassembling it. Make sure there are no vases, cabinets or glass objects blocking the angle of view. And you’re done.
Settings of the AJAX MotionProtect
This detector, like all others, can be programmed in 3 sensitivity modes. In the least sensitive position it is immune to pets up to 20KG and 50cm in height. Put the sensitivity in the middle or highest position, then the immunity for pets decreases. Your pet will then be noticed more quickly when moving, or only smaller and lighter pets will be able to walk around freely.
Battery powered
The detector, like all AJAX products, runs on batteries and is completely wireless, so it can be placed anywhere without having to lay cables. The service life of the batteries supplied as standard is 4 years under normal use. After this time they are easy to replace for new ones for a few euros. These batteries are always available from stock. How to replace the batteries can be found in the manual of the AJAX MotionProtect.
Alternatives
For the same motion detection but with built-in radar you can choose the AJAX MotionProtect Plus.