AJAX MotionProtect Plus
AJAX MotionProtect Plus is a motion detector intended for inside your home or business.
The AJAX MotionProtect Plus can be compared to the standard AJAX MotionProtect in terms of applications only with an additional built-in radar module. This module verifies perceived temperature differences of the PIR sensor in the room by means of radar.
Most reliable detector from AJAX
Through the chosen motion detection method, a combination of a PIR sensor and a radar module you get a reliable result if this detector sounds an alarm.
When checking airflows of varying temperature
The standard AJAX MotionProtect motion detector is the best-selling detector, so why choose this plus version? Why is radar sometimes necessary?
There are situations in the house where you want to switch on the alarm system while a window is open. Everybody opens his bedroom window sometimes to let it air. Because air currents of different temperatures can occur in the room, the standard MotionProtect can give a false alarm signal. This MotionProtect Plus filters these false alarms out of the system because the sensor not only looks at temperature differences, but also at actual movement of a certain weight by means of radar technology. This detector has two different sensors on board, and only if they both perceive the same will an alarm be made.
In this way you can open the window in your bedroom with peace of mind and still activate the alarm. Only when someone really walks in, the siren will sound and the alarm will appear on your smartphone.
There are more situations where the AJAX MotionProtect Plus comes in handy
Not only does radar offer an advantage with open windows, but also in living rooms where a fireplace is burning while the system is switched on, or an air conditioner is cooling down in the summer months, a motion detector without radar verification can provide a false alarm.
If the above examples do not apply to you, you might as well buy the standard motion detector, AJAX MotionProtect, for less money.
Range from the Hub
The range of the AJAX MotionProtect Plus is 1,700 meters in open field. The ideal mounting height is 2.40 metres, and the battery supplied as standard will last up to 4 years. Of course, all installation supplies are included.
Detection range of the AJAX MotionProtect Plus
The AJAX MotionProtect Plus can monitor an area of 12 meters from the sensor for movement at an angle of 90 degrees. If you place the detector in the corner of a room, the entire room will be protected.
Mounting height
The ideal height to mount the AJAX MotionProtect Plus is 2.40 metres. At this height the detector is the least sensitive to the possible presence of pets. After all, it is not intended to receive a burglary alarm if your dog or cat walks through the living room. A dog weighing up to 20 kilograms can walk around freely at this height without triggering the alarm. If you mount the AJAX MotionProtect Plus lower than the recommended 2.4 metres high, it will respond more quickly to pets and will also reduce the detection distance of 12 metres.
Registration and Mounting
AJAX MotionProtect Plus connects to the AJAX security system in just a few taps. Open the AJAX app, scan the QR code and assign the detector to one of the rooms.
Mount the detector on a wall without disassembling it. Make sure there are no vases, cabinets or glass objects blocking the angle of view. And you’re done. Translated with www.DeepL.com/Translator (free version)
Settings of AJAX MotionProtect Plus
This detector, like all others, can be programmed in 3 sensitivity modes. In the least sensitive position it is immune to pets up to 20KG and 50cm in height. Put the sensitivity in the middle or highest position, then the immunity for pets decreases. Your pet will then be noticed more quickly when moving, or only smaller and lighter pets will be able to walk around freely.
Battery powered
The detector, like all AJAX products, runs on batteries and is completely wireless, so it can be placed anywhere without having to lay cables. The service life of the batteries supplied as standard is 4 years under normal use. After this time they are easy to replace for new ones for a few euros. These batteries are always available from stock. How to replace the batteries can be found in the MotionProtect Plus manual.
Alternatives
For the same motion detection but without built-in radar you can choose the AJAX MotionProtect.